Ürünler
Tornalama
Frezeleme
Yüzey frezeleme
Yanal frezeleme
Kanal Frezeleme Takımları
Radüslü form işleme takımları
Karbür parmak frezeler
Delik delme
Klavuz ve paftalar
Hassas takım tutucular
Bağlantı ekipmanları
Kalıp ekipmanları
Aşındırma ve tesviye
Testereler
Ölçü aletleri
Bileme Makinaları
Diğer Ürünler
BW - NMG serisi
BW - SMG serisi
BW - MG serisi
Diğer
WIDIN - ZAMUS STAR
WIDIN - ZAMUS PLUS
WIDIN - NEO CLASSIC X-STAR
WIDIN - ZAMUS CLASSIC
WIDIN - ZAMUS THUNDER
WIDIN - ZAMUS SUS-MATE
WIDIN - ZAMUS COPPER-MATE
WIDIN - ZAMUS GRA-MATE
WIDIN - ZAMUS AL-MATE
WIDIN - STANDARD
Sert maden uçlar
WIDIN - ZAMUS STAR
2 FLUTE, TAPER NECK BACK DRAFT TYPE
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to
2 FLUTE, TAPER NECK BACK DRAFT TYPE
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
2 FLUTE, TAPER NECK BACK DRAFT TYPE
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
2 FLUTE, LONG NECK
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ”,
and should also be referred to.
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ”,
and should also be referred to.
2 FLUTE, LONG NECK BACK DRAFT TYPE
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
2 FLUTE, LONG NECK
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
- If the workpiece has draft angle, the interference length
will be longer than the L2.
- Please refer to the effective neck length for the various draft angles.
- In addition, the angle at which the tool
will interfere with the workpiece is shown
as the “interference angle θ2”,
and should also be referred to.
4 FLUTE, CORNER RADIUS BROKEN INDEX
- The impacting debut of new type endmill for high hardened steels
up to HRc70 and high speed machining up to 200m/min.
- High precision and excellent surface due to each 4F unequal
index geometry.
- Longer tool life over 50% as reducing chatter and resonance.
- The impacting debut of new type endmill for high hardened steels
up to HRc70 and high speed machining up to 200m/min.
- High precision and excellent surface due to each 4F unequal
index geometry.
- Longer tool life over 50% as reducing chatter and resonance.
4 FLUTE, CORNER RADIUS BROKEN INDEX
- The impacting debut of new type endmill for high hardened steels
up to HRc70 and high speed machining up to 200m/min.
- High precision and excellent surface due to each 4F unequal
index geometry.
- Longer tool life over 50% as reducing chatter and resonance.
- The impacting debut of new type endmill for high hardened steels
up to HRc70 and high speed machining up to 200m/min.
- High precision and excellent surface due to each 4F unequal
index geometry.
- Longer tool life over 50% as reducing chatter and resonance.
4 FLUTE, STUB CUT LENGTH,
with EXTENDED NECK
- High Speed & High feed rates.
- The wide pitch can reduce cycle time compare
to conventional ball endmill.
- Straight flute design minimized corner radius breakage.
- Back draft type can avoid to create chatter & deflection.
with EXTENDED NECK
- High Speed & High feed rates.
- The wide pitch can reduce cycle time compare
to conventional ball endmill.
- Straight flute design minimized corner radius breakage.
- Back draft type can avoid to create chatter & deflection.
2 FLUTE, CBN BALL NOSE, with EXTENDED NECK
- Suitable for high speed cutting & high feed rate due to
newly developed raw-material and new coating.
- Straight flute design minimized corner radius breakage.
- Back draft type can avoid to create chatter & deflection.
- Suitable for high speed cutting & high feed rate due to
newly developed raw-material and new coating.
- Straight flute design minimized corner radius breakage.
- Back draft type can avoid to create chatter & deflection.
2 FLUTE, STUB CUT LENGTH, BALL NOSE
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Excellent workpiece finishes.
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Excellent workpiece finishes.
3 FLUTE, BALL NOSE for FINISHING DIE & MOLD
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Excellent workpiece finishes.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Excellent workpiece finishes.
4 FLUTE, TAPER NECK, FINISHING DIE & MOLD
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Excellent workpiece finishes.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Excellent workpiece finishes.
2 FLUTE, STUB CUT LENGTH,
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius against chipping in high speed machining.
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius against chipping in high speed machining.
4 FLUTE, STUB CUT LENGTH,
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius against chipping in high speed machining.
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius against chipping in high speed machining.
2 FLUTE, STUB CUT LENGTH,
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius(below 0.05) against chipping
in high speed machining.
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius(below 0.05) against chipping
in high speed machining.
4 FLUTE, STUB CUT LENGTH,
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius(below 0.05) against chipping
in high speed machining.
with EXTENDED NECK
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius(below 0.05) against chipping
in high speed machining.
Ürün Adı :
4 & 6 Ağızlı Köşe Radüslü Finish Frezesi
Kod :
ZE724(6)
Marka :
WIDIN
Uygulama :
4 & 6 FLUTE, FINISHING for DIE & MOLD
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius(below 0.05) against chipping
in high speed machining.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Corner radius(below 0.05) against chipping
in high speed machining.
2 FLUTE, STUB CUT LENGTH,
CORNER RADIUS with EXTENDED NECK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
CORNER RADIUS with EXTENDED NECK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
4 FLUTE, STUB CUT LENGTH,
CORNER RADIUS with EXTENDED NECK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
CORNER RADIUS with EXTENDED NECK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
4 FLUTE, 45˚ HELIX FINISHING DIE & MOLD
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Can be reduced cycle time as finishing machining of 2XD.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Can be reduced cycle time as finishing machining of 2XD.
4 FLUTE, STUB CUT LENGTH,
CORNER RADIUS with LONG SHANK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
CORNER RADIUS with LONG SHANK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
6 FLUTE, 45˚ HELIX STUB CUT LENGTH,
CORNER RADIUS with EXTENDED NECK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
CORNER RADIUS with EXTENDED NECK
- Applied various corner “R” and effected length.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
2 FLUTE, 35˚ HELIX REGULAR LENGTH
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
4 FLUTE, 45˚ HELIX REGULAR LENGTH
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
6 FLUTE, 50˚ HELIX REGULAR LENGTH
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
for RIB PROCESSING
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Long neck design for deep machining near walls.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Long neck design for deep machining near walls.
2 FLUTE, for RIB PROCESSING
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Long neck design for deep machining near walls.
- Designed to machine high hardened materials up to HRc 70.
- Suitable for dry cutting & high speed cutting due to
newly developed raw-material and new coating.
- Long neck design for deep machining near walls.