Ürünler
Mikrometreler
• Hammertone-green, baked-enamel-finished frame.
• Ratchet Stop or Friction Thimble for exact repetitive readings.
• With a standard except for 25mm model.
• Ratchet Stop or Friction Thimble for exact repetitive readings.
• With a standard except for 25mm model.
• Satin-chrome-finished frame, tapered (on the anvil side) for hard-to-reach
places.
• With a standard except for
.5"/1" models.
places.
• With a standard except for
.5"/1" models.
• Heat-insulated frame, tapered (on the anvil side) for hard-to-reach places.
• With a standard except for 25mm model.
• A ratchet stop or friction thimble for a constant measuring force.
• With a standard except for 25mm model.
• A ratchet stop or friction thimble for a constant measuring force.
Ürün Adı :
Ratchet Thimble Micrometer
Kod :
102-701
Marka :
Mitutoyo
Uygulama :
SERIES 101, 102
New smoother action Ratchet Thimble
Ürün Adı :
Outside Micrometers
Kod :
406-250
Marka :
Mitutoyo
Uygulama :
SERIES 406, 106
Non-Rotating Spindle Type
IP65 Coolant Proof Micrometer with 2mm/rev Spindle Feed
Ürün Adı :
Coolant Proof Micrometer
Kod :
293-230
Marka :
Mitutoyo
Uygulama :
SERIES 293
with Dust/Water Protection Conforming to IP65 Level
Preset, Zero-setting, Power ON/OFF, Data hold, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error
Alarm: Low voltage, Counting value composition error
Ürün Adı :
ABSOLUTE Digimatic Micrometers
Kod :
227-201
Marka :
Mitutoyo
Uygulama :
SERIES 227
with Constant & Adjustable Fine-loading Device
IP-54 ABSOLUTE Digimatic Micrometers
Ürün Adı :
Quick-Setting Outside Micrometers
Kod :
102-450
Marka :
Mitutoyo
Uygulama :
SERIES 293,102
• 1mm spindle thread pitch for quick setting.
• The measurement can be read directly from the thimble due to the 100 step graduation.
• The measurement can be read directly from the thimble due to the 100 step graduation.
Ürün Adı :
Caliper Type Micrometers
Kod :
143-101
Marka :
Mitutoyo
Uygulama :
SERIES 343, 143
FEATURES
• With Ratchet Stop for constant force.
• With SPC output (series 343).
• With Ratchet Stop for constant force.
• With SPC output (series 343).
Ürün Adı :
Outside Micrometers
Kod :
104-136A
Marka :
Mitutoyo
Uygulama :
SERIES 340, 104
with Interchangeable Anvils
with Extension Anvil Collars
• With dial indicator for direct GO/NG-GO judgment for mass-produced parts.
• Anvil retracting trigger for quick measurement.
• With a standard except for 25mm model.
• Anvil retracting trigger for quick measurement.
• With a standard except for 25mm model.
Ürün Adı :
Screw Thread Micrometers
Kod :
125-103
Marka :
Mitutoyo
Uygulama :
SERIES 125
Provided with a 60 degree V-anvil and conical spindle for easily measuring pitch diameters of metric or unified screw threads.
Ürün Adı :
Screw Thread Micrometers
Kod :
326-251
Marka :
Mitutoyo
Uygulama :
SERIES 326, 126
Interchangeable Anvil-Spindle Tip Type
Interchangeable Anvil Type
Ürün Adı :
Gear Tooth Micrometers
Kod :
324-251
Marka :
Mitutoyo
Uygulama :
SERIES 324, 124
Interchangeable Ball Anvil-Spindle Tip Type
Ürün Adı :
Disk Micrometers
Kod :
123-101
Marka :
Mitutoyo
Uygulama :
SERIES 323, 223, 123
• Diameter of measuring disk: 20mm
(30mm: models over 100mm)
• 0.7mm (1mm: models over 100mm) edge thickness to enter narrow recesses.
• With Ratchet Stop for constant force.
(30mm: models over 100mm)
• 0.7mm (1mm: models over 100mm) edge thickness to enter narrow recesses.
• With Ratchet Stop for constant force.
Ürün Adı :
Disk Micrometers
Kod :
369-250
Marka :
Mitutoyo
Uygulama :
SERIES 369, 227, 169
Non-Rotating Spindle Type
Ürün Adı :
Sheet Metal Micrometers
Kod :
389-251
Marka :
Mitutoyo
Uygulama :
SERIES 389, 189, 119, 118
FEATURES
• Measures thickness of sheet metal, and rubber parts.
• With Ratchet Stop for constant force.
• With a standard except for 25mm model.
• IP65 water/dust protection (389 series*).
*Except for 389-513
• With digit counter (series 189).
• Measures thickness of sheet metal, and rubber parts.
• With Ratchet Stop for constant force.
• With a standard except for 25mm model.
• IP65 water/dust protection (389 series*).
*Except for 389-513
• With digit counter (series 189).
Ürün Adı :
Spline Micrometers
Kod :
331-251
Marka :
Mitutoyo
Uygulama :
SERIES 331, 111
• IP65 water/dust protection (series 331).
• The anvil and spindle have a small diameter for measuring splined shafts, slots, and keyways.
• With Ratchet Stop for constant force.
• With SPC output (series 331).
• The anvil and spindle have a small diameter for measuring splined shafts, slots, and keyways.
• With Ratchet Stop for constant force.
• With SPC output (series 331).
Ürün Adı :
Tube Micrometers
Kod :
395-251
Marka :
Mitutoyo
Uygulama :
SERIES 395, 295, 115
Spherical and Cylindrical Anvils
Ürün Adı :
Point Micrometers
Kod :
342-251
Marka :
Mitutoyo
Uygulama :
SERIES 342, 142, 112
• Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions..
Ürün Adı :
Depth Micrometer
Kod :
329-250
Marka :
Mitutoyo
Uygulama :
SERIES 329, 129, 229
Interchangeable Rod Type
• ø4mm measuring face.
• With spindle clamp.
• With carbide-tipped measuring face model is available.
• With ratchet stop for constant force.
• With spindle clamp.
• With carbide-tipped measuring face model is available.
• With ratchet stop for constant force.